Train Sim World Wiki
Advertisement

Description

Complete an empty stock move from New York Penn to Sunnyside Yard via the train wash.

Objectives

  • CLIMB ABOARD: Sit in the Engineer's seat of the lead locomotive
  • REVERSER: Set the Reverser to the FORWARD position
  • READY TO DEPART: Release the Brakes and apply power to get moving
  • GO VIA LOCATION: Sunnyside Train Wash
  • STOP AT LOCATION: Sunnyside Main Yard
  • SET TRACK SWITCHES: Climb down and set the track switches to access Track 31
  • STOP AT LOCATION: Track 31
  • REVERSER: Set the Reverser to the NEUTRAL position
  • DUTY COMPLETE: Head over to the Pickup truck

Task Log

  • Welcome to New York Penn. Please take the train here on Track 14, empty, back to Sunnyside via the Train Wash.
  • Take it slow through the train wash. Water and high voltage power don't mix well!
NEC: New York
Locomotives ACS-64 - GP38-2
Rolling Stock Amfleet I - 50 foot Plate C Boxcar - 5201-Cubic Foot Covered Car - 30,500 Gallon Tank Car - 73-foot center-beam flatcar - 85-foot Open Deck Flatcar
Stations Newark Airport - Newark - Harrison - Secaucus Junction - New York Penn - New Rochelle
Other Locations Fresh Pond Yard - Hell Gate Bridge - Oak Point Yard
Operators Amtrak - CSX Transportation
Tutorials ACS-64 Introduction - GP38-2 YN3 Introduction
Scenarios City Sprinter - Terminal Switcher - City Lights - Back Track - Right Round - Trash Collector - New York Switcher
Miscellaneous Service Timetable
DLC CSX GP40-2 - Amtrak SW1000R
Guides Driving the SD40-2, GP38-2 and GP40-2 - The Alerter - Switching/Shunting - Driving the ACS-64 - NEC Collectibles
Advertisement