The BR Class 166, officially named 'Networker Turbo Express', or 'Thames Turbo' is a UK commuter diesel multiple unit operated solely by Great Western Railway on their routes through the Thames Valley. As of July 2017, the units are now also being introduced into service in the Bristol area.
The BR Class 166 is featured in the Great Western Express add-on in the Great Western Railway livery. The unit has a maximum speed of 90 mph and 21 units were built between 1992 and 1993 for Network South East. These locomotives passed on to Great Western Railway after the privatization of British Rail.
Originally specified and built for British Rail, the BR Class 166 diesel-hydraulic mutiple unit belong to the Networker family and were originally known as Networker Turbos to distinguish them from the electrically propelled versions of the family. Still widely used throughout the Great Western Railway, they have long proved their reliability and endurance for over twenty years.
The Networker family was to be a wide range of standardised EMU and DMU fleets that would revolutionise South East London, Kent, and the Great Western and Chiltern territories, comprising of both local commuter and more expressfocused stock. In 1989, after having already worked as a prototype Class 210, the Networker development train, now classified as the Class 457, began the testing of what would become the technical arrangements of the average third rail Networker. The following year saw a conversion to overhead equipment for testing, and another reclassification to the Class 316.
Despite the extensive electrical testing, some of the first Networkers to be built at ABB York were diesel-hydraulic multiple units for the Great Western and Chiltern Main Lines, the Class 165 and Class 166, known as the Networker Turbo and Networker Turbo Express respectively. Both of these lines were not electrified, such a development was not deemed possible at the time, and so diesel traction was still a necessity.
The Class 166 Networker Turbo Express was designed and built as a faster variant of the earlier Class 165. The 90 mph-capable Class 166 would be able to cover longer distance stopping services while the slower Class 165 worked the local services out of London Paddington. As the Class 166 was designed with express workings in mind, they were also fitted with air-conditioning, an extra toilet, first class with tables, luggage storage and a fully carpeted interior with different panelling.
A total of 21 Class 166 DMUs were delivered to Network Southeast between 1992 and 1993, for use as express commuter stock out of London Paddington and out along the Thames Valley. The fleet has subsequently operated as such for Thames Trains, First Great Western Link, First Great Western and now, Great Western Railway. The fleet’s Thames Valley-exclusivity was however stopped by GWR, as a handful of 166s have begun working the Severn Beach Line, having been replaced by Class 387 Electrostars, which themselves are a derivative of the Networker family.
In the past 7 years, the Class 166 fleet has undergone multiple refreshes to bring them up to standard. An £8 million project was announced in 2010 and saw the fleet receive repainted interiors, upgraded toilets, a new GPS-based Passenger Information System and retrimmed carpets & seats. Four years later, and the Class 166s also received new headlights, toilets and door buttons & alarms. The most recent change for the fleet is the gradual re-livery into Great Western Green, and they will soon receive 2+2 seating as more of the fleet moves out of London.
Great Western RailwayEdit
21 BR Class 166s are currently operated by Great Western Railway. They became part of Great Western Railway when First Great Western Link won the Thames Valley Franchise in 2004. This became part of First Great Western and eventually Great Western Railway. They are currently operate on services from London Paddington to the Thames Valley. Upon the completion of the Great Western Main Line electrification, they will be moved to the Bristol area, being replaced by BR Class 387 units.
Starting the LocomotiveEdit
1. Enter the leading cab
2. Unlock the Master Key
3. Move the Combined Throttle and Brake controller to the Full Service position
4. The parking brake on the Class 166 is automatic so there is no control to operate.
5. Press the Engine Start button to start the engines on all of the vehicles.
6. The train starts with all safety systems disabled, to activate them, locate the controls at the upper left console from the driving position and on the Micro- Circuit Breaker panel behind the driving position. The train is fitted with Automatic Warning System (AWS), Train Protection and Warning System (TPWS), Driver Vigilance Device (DSD) and Driver Reminder Appliance (DRA) systems. The relevant controls will therefore become enabled upon activating the system.
7. On enabling the AWS system, this will also enable the TPWS system as both systems are interlinked. A self-test will commence and you will need to acknowledge the alert to proceed. Press the Q key on your keyboard to do so.
8. On enabling the DSD system, you will hear an alert periodically that you will need to acknowledge using the Q key. If you do not react quickly enough, the train will commence an emergency brake application.
9. If the DRA is enabled, press the button to deactivate the system. The DRA system, when activated, will disable the throttle control, you will not be able to apply power until the system has been deactivated.
10. Enable the Passenger Saloon Lighting (Train Lighting) by pressing the appropriate button.
11. If you wish, you can adjust the Gauge Illumination by using the Back Illumination controls under the Speedometer.
12. Set your headlights to the correct running mode, Day Mode during daylight hours from 8am until 8pm; Night Mode during twilight and evening hours from 8pm to 8am or where it is necessary to improve visibility for users of the railway and trackside signage.
13. Ensure all cab doors are closed.
14. Ensure all passenger saloon doors are closed. Door controls for each side of the train can be controlled independently. You can interact with the door system by using the TAB key on your keyboard and selecting the appropriate option. If the doors are open, a relevant option for you to close and lock the doors will be available. You can also interact with the door control systems via the 3D cab. Click the relevant control to open or close the doors on the side required. Important Safety Notice: Care should be taken to ensure the correct doors are unlocked, only unlock doors that are adjacent to a platform. For reference, the left side relates to the left side when facing the direction of travel. The BR Class 166 incorporates a traction interlock with the Central Door Locking (CDL) mechanism, this means you cannot apply power if the doors are open or unlocked. A relevant indicator is displayed on the control desk to advise of the door interlock status.
15. To move your train, simply move the reverser to the forward position, deactivate the DRA system (if enabled), move the Combined Throttle and Brake Controller to the neutral position. On reaching 1 bar, move the power controller to notch 1. As the train begins to move, you can then select any other power notch, ensuring you do not exceed the Maximum Permitted Speed. setting them to ON means they will ignore all signals from the lead locomotive and remain in idle.
|Great Western Express|
|Locomotives||BR Class 43 HST - BR Class 66 - BR Class 166|
|Rolling Stock||BR Mk3 - HKA Hopper - FKA Container Flat|
|Locations||Paddington - Old Oak Common TMD - Reading|
|Operators||Great Western Railway - DB Cargo UK|
|Tutorials||Class 43 Introduction - Class 166 Introduction - Class 66 Introduction - Station Stopping|
|Scenarios||Down the Line - West World - Christmas Closures - Aggregate Industries - Drag Line|
|Miscellaneous||History - Signalling|